Usage:
• Use to process rubber (RB), TPR to change the structure and increase physical and chemical attributions.
good adhesive between RB and PU, phylon, EVA, leather materials.
Attribution: 
• Suitable to use with PU adhesive.
• Easy to use and working time is short.
• Dilute B powder completely to directly process.
Using method:
• To blend B powder into the solvent, shake for completely diluting (1kg of 1015F contains 20g B powered)
• To record diluting time to control using duration.
• Do not use when solvent turns to yellow or precipitated.
• To contain in ceramic material or dark color crystal to avoid the disintegration by light.
• Put cotton pad into processing substance, then brush to the surface.
• After the processing, it should be waited until it dries completely, and then put adhesive otherwise, it turns to yellow color and reduces the pulling strength.
• Drying conditions:
Drying kiln: Surface temperature: 50-60°C × 3-4 minutes .
If not putting via drying kiln, keep in room temperature: approximately 10-15 minutes.
Pasting process
To put grey cutting rubber heel or clean, after that, process 1015F to put into drying oven in temperature of 50-60°C within 3-4 minutes, keeps it dry and after that, put adhesive to material.
Packaging specification:
0.6kg/ bottle (approximately 1 liter)